JINBEI Deep reflective softbox with grid 140 cm and zoom focus system (JN-PARA-ZOOM-140KIT)

Jinbei Deep Reflective Softbox with grid and zoom focus system

The Deep Reflective Softbox comes with the B.Owens S-type bayonet and is suitable for many battery / studio flash units or LED permanent light lamps with the appropriate connection. With his Click mechanism of the bars the light shaper can be set up quickly and easily and is immediately ready for use in the studio or on location. To do this, tension the rods until they click into place and mount the Deep Softbox on the light source - done! This works easiest if you always clamp opposing bars one after the other. The softbox is just as easy to reassemble: you lift the individual rods on the speedring base slightly, press the corresponding button and then release the rod.

Note: We recommend them for Octaboxes and Deep Softboxes with a diameter of more than 120 cmNot To be used with the SPARK or DM series of flashes, as it can happen that the locking mechanism of the flash tilting device cannot withstand the increased weight of the softbox and that the inclination of the flashing device changes.

Variable lighting possible using the zoom-focus system

You can vary the hardness of the light, i.e. the hardness of the shadows on your subject, by moving the light source by up to 40 cm. Slide your Blitz further into the softbox , the angle of radiation of the reflected light is overall more focused and narrower and thus the  Shadow harder . Slide the Lightning further out of the softbox , increases the beam angle of the light and the Shadows are softer. The one pictured on the focus rod scale helps you adjust your light settings without any deviations  reproduce .

You can easily tighten the focusing rod securely using a screw cap. At one end of the rod is the Bowen's flash head speed ring , to which the light source, e.g. a studio flash or an LED permanent light, is easily attached via the Bowens S-type bayonet. The sliding bracket of the focusing rod has a reflective one Softbox adapter , to which the softbox is attached and thus completes the illuminated, reflective inner surface of the light shaper. The holder of the focusing rod also has a tilt function that you can use as you wish can point the softbox further up or down .

At the other end of the focus rod there is a hook to catch the one included in the delivery Sand counterweight to hang on. This prevents your light shaper and the light source from becoming unbalanced when you slide the light source out of the softbox. The zoom focus system has a Spigot adapter, to attach it to all common light stands.

Flexible in the design of the light

The Jinbei Deep Reflective Softbox gives you additional options for designing your light. The two supplied diffusers , the smaller interior diffuser and the front diffuser, scatter the light reflected by the silver interior coating and create gentle shadows for you homogeneous illumination .

Since they also work on smooth areas of the subject such as the skin Reduce the build-up of reflexes , they are often used in portrait and beauty photography. The 18-sided construction also creates an almost round softbox shape, which is in more natural looking, round light reflections noticeable in the eyes of a model.

With the grid included in the scope of delivery, you get a more intense, more directional light. With the honeycomb you illuminate your subject more precisely and in a more controlled manner. Use the honeycomb grille without diffusers, work with harder, higher-contrast and more direct light.

Stable, robust and versatile in everyday life

The Deep Reflective Softbox convinces with its stagile and robust Umbrella construction. The ones that stretch the cloth Metal struts sit in pockets on the softbox and are fixed to the speedring base.

The Bowens S-type speed ring is also attached to this base. This can be done through the Loosen four screws Replace it with the zoom-focus system or with another speed ring. In this way you not only use flash units or LED continuous light with Bowens connection, but also Third-party devices .

There is one in the screen Velcro opening through which you the Guide the cable of your light source so that they don't get in the way or affect the light.

For protection when not in use or for transport to shootings outside the home, stow the light shaper and accessories in the supplied one Transport bag .